Oxva VPrime 2 Podmod

OXVA presents the second version of its VPrime podmod, an electronic cigarette meant for your airy vape in direct (DL) or restrictive direct (RDL) inhalation.

Its built-in battery with a 3,400mAh capacity is quickly recharged via its USB-C port thanks to Fast Charge 3A compatibility.

As for the tank, this kit includes two 6ml VPrime Dual Mesh cartridges with sealed coils, 0.4ohm and 0.6ohm.

This podmod enables you to vape in BOOST or ECO mode, with a maximum power of 60 watts.

OXVA's VPrime 2 podmod

A podmod with a rounded look

For the second version of the VPrime, OXVA keeps its round and ergonomic design.

The podmod has slightly higher dimensions than its predecessor, being 113x41x27mm.

The main side of the VPrime 2 includes the ignition button and the 0.98" TFT screen.

The two sides of the kit offer the airflow button on one side and the locking switch on the other.

Handling of OXVA's VPrime 2 podmod

A simple and customizable operation

The VPrime 2 podmod is equipped with a performing UNITECH chipset, here in its 3.0 version.

Two functioning modes are possible, according to the desired vape type.

Please note the power value change according to the VPrime Dual Mesh cartridge installed.

• BOOST mode: this mode enables you to vape at full power, up to 60W for a very airy vape
• ECO mode: this mode is meant for a draw with medium power, for a more restrictive draw, saving battery

The menu is accessible via the ignition button and the 0.98" TFT screen.

To vape it, two solutions are possible: manually push the ignition button or automatically draw from the mouthpiece (autodraw).

The screen of OXVA's VPrime 2 podmod

The VPrime 2 also has a sliding button located on one of the podmod's sides.

This switch enables you to lock the ignition button, avoiding any involuntary activations during transport.

The locking switch of OXVA's VPrime 2 podmod

A great use capacity

For the second version of the VPrime, OXVA bets on a 3,400mAh built-in battery for long battery capacity.

This battery is recharged via the USB-C port located on the electronic cigarette's side.

Its Fast Charge 3A-compatible recharging enables you to recharge it in only 1h15, according to the manufacturer's data.

The USB-C port of OXVA's VPrime 2 podmod

The VPrime Dual Mesh cartridge

To match this second version of the VPrime, OXVA equipped it with a Dual Mesh cartridge with a sealed coil.

Once this coil is used (loss of flavor, light burnt taste), you only need to change the cartridge with a new one.

Its tank has a great e-liquid capacity of 6ml.

It is easily and quickly inserted thanks to a system of magnetic connection.

Please note that the first-generation VPrime cartridges are also compatible with the VPrime 2 podmod. They are only sold with the ECO mode.

The VPrime Dual Mesh cartridge of OXVA's VPrime 2 podmod

A versatile draw

Two VPrime Dual Mesh cartridges are included in the box contents, in 0.4ohm and 0.6ohm.

The operating principle of this cartridge varies according to the mode selected.

0.4ohm VPrime Dual Mesh cartridge (pre-installed):

• In Eco mode: used between 28 and 40W, one coil is required for a semi-airy draw in restrictive direct inhalation (RDL)
• In Boost mode: used between 40 and 60W, two coils are activated for a 0.2ohm value and a very airy vape in direct inhalation (DL)

0.6ohm VPrime Dual Mesh cartridge:

• In Eco mode: used between 20 and 35W for a more restrictive vape (RDL)
• In Boost mode: used between 35 and 50W for an airy draw (DL)

An adjustable airflow

According to the draw type desired, you'll have the possibility to change the air intakes.

For this, use the airflow button located on one of the VPrime 2 podmod.

Freely adjust the air intakes to easily alternate between a very airy vape (DL) and a more restrictive draw (RDL).

The airflow button of OXVA's VPrime 2 podmod

A great 6ml capacity

Each VPrime Dual Mesh cartridge has a 6ml e-liquid capacity.

To fill the tank, no need to take the cartridge off the podmod.

You only have to:

1. Lift the silicone strip located on the side
2. Insert the bottle tip into the hole
3. Softly pour your e-liquid
4. Carefully close the strip

Is the cartridge new? Wait for some minutes before vaping to let the coil be correctly primed with e-liquid.

Filling the cartridge of OXVA's VPrime 2 podmod

Box contents

• 1 3,400mAh VPrime 2 podmod
• 1 0.4ohm VPrime Dual Mesh cartridge (pre-installed)
• 1 0.6ohm VPrime Dual Mesh cartridge
• 1 USB-C cable
• 1 user guide

The VPrime 2 podmod is made by OXVA.

Box contents of OXVA's VPrime 2 podmod