OXVA NeXlim 2 Podmod

Discover all the details of the OXVA's NeXLIM V2 podmod in this video.

OXVA offers the second edition of its NeXlim podmod: a compact electronic cigarette meant for beginner or expert vapers wishing for a compact and simple-to-use podmod.

This kit works with a 2,000mAh built-in battery and delivers a power output between 5 and 40 watts.

With an auto-draw functionality, you only have to draw from the mouthpiece to vape.

It also offers two functioning modes, BOOST and ECO, enabling you to adapt the draw to your needs.

With the NeXlim 2, you'll receive two NeXlim UNITECH 3.0 cartridges of 4ml, each equipped with a sealed coil in double mesh (0.6 and 0.8ohm).

OXVA's NeXlim 2 podmod

A design from the NeXlim collection

Like its predecessor, the NeXlim 2 is a rectangular podmod with rounded shapes. In terms of dimensions, it measures 127.5mm high, 17.5mm wide, and 28.5mm deep and weighs 89g.

Its structure is composed of a zinc alloy, a PU leather covering according to the model chosen, and a PCTG cartridge.

The manufacturer OXVA also equipped the NeXlim 2 podmod with:

• A 0.85" HD screen
• An airflow sliding button
• A switch button for different settings
• A 5V/3A USB-C port

Handling of OXVA's NeXlim 2 podmod

A system of magnetic connection

The cartridge delivered with the podmod is easily fixed thanks to a magnet system enabling a reliable connection.

This system ensures a stable connection and makes cartridge changes easier, for example, to alternate between two e-liquids.

The magnetic connection system between the cartridge and OXVA's NeXlim 2 podmod

A unique button for an intuitive podmod

To help those starting to vape, OXVA equipped its NeXlim 2 podmod with an auto-draw system. Handy, it enables you to draw from the mouthpiece to vape.

With a unique switch button, it enables you to browse the podmod's settings and customize them if needed.

A long push on the unique button gives you access to the E-manual, gathering all the shortcuts available:

• A quick push: you turn the screen on
• 2 successive pushes: go from the BOOST (flame) and ECO (leaf) modes
• 3 pushes: access to the power setting (up to 40W)
• 4 pushes: open the menu to select another theme
• 5 pushes: turn on or off the podmod
• 6 pushes: activation or deactivation of the screen animations
• 7 pushes: reset of the puff counter

Once again, OXVA offers a simple-to-use podmod but lets you choose how to make some customizations.

As for the two modes, choose the Boost mode to use all the power of your podmod with a thicker vapor or favor the ECO mode for a lighter vapor and save some battery.

If you wish to set the power to a precise level, use the HD screen and the functionality enabling the manual setting of the power (0 to 40W) by successively pushing the switch button three times.

The screen of OXVA's NeXlim 2 podmod

A rechargeable built-in battery in 5V/3A

Your NeXlim has a built-in battery with a 2,000mAh capacity.

Its recharge is made via the USB-C port located under the podmod, thanks to the USB cable included, with a 5V/3A intensity for a quick recharge in only a few minutes.

The USB-C port of OXVA's NeXlim 2 podmod

Two NeXlim Unitech 3.0 cartridges

With the NeXlim 2 podmod, you'll receive two NeXlim cartridges, each with a 4ml capacity:

• 0.6ohm cartridge (pre-installed): use between 20 and 40 watts, suited to a semi-airy draw in RDL
• 0.8ohm cartridge: use between 12 and 32 watts, for those with a tight draw in MTL

These cartridges include a sealed Dual Mesh x Super Pulse coil. When the coil starts to show signs of wear (loss of flavor, burnt taste), throw the cartridge out and fill it with a new one.

NB: The NeXlim 2 is compatible with all cartridges of the NeXlim collection.

The cartridge of OXVA's NeXlim 2 podmod

An airflow adjustable on 3 levels

The airflow is set on the podmod's side, with 3 levels available to change the draw.

Indeed, you can go from a tight MTL draw to a slightly airier draw in RDL thanks to this airflow push button.

The airflow of OXVA's NeXlim 2 podmod

4ml in top-filling

The NeXlim UNITECH 3.0 cartridge is filled on the side, without having to take it off the podmod.

To fill it, you only need to:

1. Softly pull the silicone cap on the cartridge's side
2. Introduce the thin tip of the e-liquid bottle into the filling hole
3. Slowly pour the e-liquid
4. Carefully close the silicone cap

For a new cartridge or the first fill, we recommend waiting for at least 5 to 8 minutes before vaping so the coil cotton is correctly soaked.

The filling system of OXVA's NeXlim 2 podmod

Box contents

• 1 2,000mAh OXVA NeXlim 2 podmod
• 1 0.6ohm 4ml NeXlim UNITECH 3.0 cartridge (pre-installed)
• 1 0.8ohm 4ml NeXlim UNITECH 3.0 cartridge
• 1 USB-C cable
• 1 user guide

The NeXlim 2 podmod is made by OXVA.

Box contents of OXVA's NeXlim 2 podmod