Justfog Glent Pro Podmod

Direct successor of Glent, the Glent Pro podmod by Justfog is a complete kit thought for enthusiasts of tight draw in indirect inhaling (MTL).

Compact, customizable thanks to included stickers, its filter drip-tips, and equipped with an OLED screen, this podmod in a rectangular format is suited to vape beginners as well as experts.

Simple-to-use, the Glent Pro is automatically triggered by an inhalation or via a fire button.

Its 3.5ml cartridge is filled on the side and has a built-in coil of 0.6ohm.

Justfog's Glent Pro podmod

A customizable design

Made in anodized aluminum and polycarbonate, the Glent Pro podmod displays compact dimensions of 104x32.4x17mm for a total weight of 67g.

Thanks to its rectangular format, it will easily glide in all your pockets and bags.

On the podmod, you'll find:

• A Fire button
• An OLED screen
• An adjustable airflow
• A USB-C port

Want a one-of-a-kind podmod? Use the sticker sheets included in the box to customize your podmod to your liking.

In addition, a clear TPU protective case is also included to protect your kit from everyday bumps and dust.

Another perk: the podmod comes with three drip tips, all designed for a tight draw with indirect inhalation (MTL):

• 1 Classic PCTG drip tip (pre-installed)
• 2 Filter-style drip tips

Handling of Justfog's Glent Pro podmod

A magnetic connection

Thanks to its magnetic connection between the cartridge and the battery, the Glent Pro is handy: you only have to clip and unclip its cartridge on the magnetic base.

The magnetic connection between the cartridge and the Glent Pro podmod

How does the Glent Pro podmod work?

The Glent Pro features an OLED screen that displays all essential information: battery level, selected power setting, current coil value, puff counter, and lock status.

All settings are adjusted using the single button located on the podmod:

• Press the button twice: resets the puff counter
• Press the button 3 times: adjusts the output power from 5 to 25W
• Press the button 4 times: locks or unlocks the podmod
• Press the button 5 times: turns the podmod on or off

When it comes to vaping, you can choose between two modes: automatic activation by inhalation (auto-draw system), specially designed for beginners who want effortless use, or pressing the fire button.

The screen of Justfog's Glent Pro podmod

1,500mAh of capacity

The Glent Pro podmod is equipped with a 1,500mAh built-in battery.

The recharge is made via the USB-C port located under the podmod, with a quick recharge at 2A in a few minutes.

Caution: the USB-C cable is not included by the manufacturer; you'll have to get one.

The USB-C port of Justfog's Glent Pro podmod

An adjustable airflow

To precisely customize your vape experience, Justfog has equipped the Glent Pro with adjustable airflow, positioned on the podmod's back.

By sliding from top to bottom, you can go from a very tight draw suited to MTL vaping to a slightly airier draw, according to your needs.

The airflow of Justfog's Glent Pro podmod

A 3.5ml cartridge

The Glent Pro works with the Glent cartridge of Justfog. Its tank, made in PCTG, offers a 3.5ml capacity.

Its clear body enables you to control the level of e-liquid left in a single blink.

Laterally filled, you don't need to take the cartridge off the podmod.

Equipped with a sealed coil with a 0.6ohm coil, the latter presents wear signs (loss of flavors, light burnt taste), you only need to change the whole cartridge.

For the 0.6ohm coil, Justfog recommends using it at 19.5W power.

The Glent cartridge of Justfog's Glent Pro podmod

The drip tips included with the Glent Pro

With the Glent Pro, Justfog delivers two types of 510 mouthpieces:

• A classic 510 drip tip: mouthpiece with a standard podmod format, for conventional use
• Two drip tips in paper filter format: resembling the end of a traditional cigarette

These mouthpieces are directly fixed on the Glent cartridge and can be easily changed, letting you switch from one mouthpiece to another, according to your needs.

The filter drip-tip of Justfog's Glent Pro podmod

How to fill the Glent Pro cartridge?

Justfog chose a lateral filling, accessible without having to take the cartridge off the battery. A silicone strip, positioned on the lateral side of the cartridge, protects the filling hole.

Here are the steps to fill your podmod:

1. Lift the silicone strip on the cartridge's side
2. Insert the e-liquid bottle tip into the filling hole
3. Fill the tank
4. Close the silicone strip to block the hole

Careful: Wait 5 to 10 minutes before the first inhalation in case of a new cartridge, so the coil cotton is correctly primed with e-liquid.

The filling system of Justfog's Glent Pro podmod

Box contents

• 1 1,500mAh Justfog Glent Pro podmod
• 1 Glent cartridge with a 0.6ohm sealed coil
• 1 classic 510 drip tip
• 2 filter-type 510 drip tips 
• 2 sticker sheets
• 1 clear protection
• 1 user guide

The Glent Pro podmod is made by Justfog. It is delivered without a USB-C cable.

Box contents of Justfog's Glent Pro podmod