Dotmod DotPod Max Lite Podmod

Dotmod offers the Lite version of the DotPod Max podmod, a compact e-cigarette with a body in clear polycarbonate with a dynamic RGB lighting system.

This podmod also has a 2,100mAh built-in battery and a 0.87" TFT HD color screen.

Are you looking for a powerful podmod? With the DotPod Max Lite, you can reach a maximum power of 60W.

It is meant for vape beginners as well as expert users, thanks to its format and the functionalities they offer.

Dotmod's DotPod Max Lite podmod

A clear body with RGB lighting

What makes the DotPod Max Lite stand out from the other Dotmod collection is its clear polycarbonate body, which shows the inside of the electronic cigarette.

This material makes it light and sturdy.

The podmod also has a rectangular format with dimensions of 94.5x43x22.5mm for a weight of only 95g, and its round edges make it agreeable in hand.

On its main side, you'll find from top to bottom:

• A unique button
• A 0.87" HD color screen

The USB-C port is located under the podmod.

Handling of Dotmod's DotPod Max Lite podmod

On the device's edges, an RGB lighting offers 8 luminous modes that can be activated during use.

To change the light mode, here's how to do it:

1. Press the unique button 6 times to access the menu
2. Browse to the LED light, then hold the button to enter
3. Hold the button on Color
4. From there, each press on the button will show the modes available in the following order: Red, Yellow, Blue, Green, Aqua, Purple, White, and Colorful

Simply let go of the button once the color you want is selected.

You can also adjust the brightness of this light on 5 levels.

The RGB colors of Dotmod's DotPod Max Lite podmod

A customizable and easy-to-use podmod

To turn your podmod on or off, you simply need to press the unique button five times.

Once it’s turned on, you can adjust the settings as desired using the same button.

All operations are performed using a single button:

• 3 clicks to adjust the power from 5 to 60W
• 4 clicks to lock the podmod (automatic draw remains active in locked mode)
• 6 clicks to access the menu

As for the screen, it displays the power level, battery percentage, and coil value.

The screen can be customized using the three themes available in the menu options.

When it comes to vaping, the podmod is designed to suit both beginners and more experienced users; you can choose between:

• Automatic activation: simply inhale through the mouthpiece to vape
• Manual activation: press the single button to vape

The screen of Dotmod's DotPod Max Lite podmod

A 2,100mAh built-in battery

With its DotPod Max Lite, the manufacturer guarantees you a long battery life, thanks to a 2,100mAh built-in battery.

When it's time to recharge, use a USB-C cable (not included) and plug it into the port located at the bottom of the podmod, then connect it to an external power source.

The USB-C port of Dotmod's DotPod Max Lite podmod

The DotPod Max Lite cartridge

Along with your podmod, Dotmod includes a clear DotPod Max cartridge made of PCTG.

It holds up to 5ml of e-liquid and is refillable from the top via a sliding door.

Equipped with a sealed coil, when the coil wears out (decreased flavor, burnt taste), simply replace the entire cartridge with a new one.

The cartridge of Dotmod's DotPod Max Lite podmod

A built-in coil

The DotPod Max Lite is equipped with a 0.6ohm sealed coil, designed for a semi-airy RDL draw, and is intended for use between 20 and 24W.

Note: Your podmod is also compatible with the empty DotPod Max Tank cartridge (sold separately), which accepts removable DotCoil coils.

An adjustable airflow

Below the cartridge is an adjustable airflow dial.

Turn it to select one of the four available airflow settings: the more you open the airflow, the airier the draw; the more you close it, the tighter the draw and the more flavor-focused it becomes.

The airflow of Dotmod's DotPod Max Lite podmod

How to fill your tank?

The DotPod Max cartridge features top-fill refilling via a sliding door.

There’s no need to remove the cartridge from its base to refill it.

Grab a bottle of e-liquid, then:

1. Slide open the strip at the top of the cartridge
2. Insert the tip of the e-liquid bottle into the fill port
3. Gently pour in the e-liquid
4. Carefully close the strip

Since the cartridge is new, wait 5 to 10 minutes before vaping to allow the coil to properly prime with e-liquid.

Filling of the cartridge on Dotmod's DotPod Max Lite podmod

Box contents

• 1 2,100mAh DotPod Max Lite podmod
• 1 5ml DotPod Max cartridge with 0.6ohm built-in coil
• 1 user guide

The DotPod Max Lite podmod is made by Dotmod.

Box contents of Dotmod's DotPod Max Lite podmod