Voopoo Drag H40 Pro Podmod

Voopoo presents the Pro version of its H40 cylindrical pod: a kit designed for tight draw (MTL) or semi-airy draw (RDL) vaping.

With its 2,450mAh built-in battery and adjustable power up to 40 watts, it’s suitable for both beginner vapers and more experienced users.

Its leather finish and zinc alloy construction make it a comfortable e-cigarette to hold.

Along with its 5ml PnP X MTL cartridge, you’ll also receive two coils rated at 0.6 and 0.8ohm.

Voopoo's Drag H40 Pro podmod

A compact tube format

The Drag H40 Pro is approximately 116.5mm tall with a diameter of 27.5mm, and weighs 120g.

Its cylindrical shape makes it easy to slip into a pocket or bag.

The body is made of zinc alloy and covered with a leather finish.

On the front panel of the mod, from top to bottom, you’ll find:

1. A Fire button
2. A color display showing essential information in real time, such as power output and battery level
3. Two navigation buttons

As for the USB-C charging port, it is located beneath the podmod.

The clearomizer, meanwhile, takes the form of a transparent cartridge made of PCTG, allowing you to check the remaining e-liquid level at a glance.

This cartridge is equipped with a rotating airflow ring and an interchangeable 510-style drip tip.

Handling of Voopoo's Drag H40 Pro podmod

A performing and intuitive podmod

Very easy to set up and use, your H40 Pro podmod features three buttons:

• The Fire button, located above the screen: it lets you vape, turn the podmod on or off with 5 consecutive presses, and access the menu with 3 quick presses
• The two buttons, "+" (top) and "-" (bottom), located below the screen: these are used to adjust the power up to a maximum of 40 watts and to navigate through the menus

Need to carry your e-cigarette? To lock the settings, press the Fire button and the "+" button simultaneously. To unlock them, press the Fire button and the "-" button.

Voopoo also offers three display themes to customize the screen to your preferences.

The screen of Voopoo's Drag H40 Pro podmod

A 2,450mAh battery

The built-in battery of Drag H40 Pro offers a 2,450mAh capacity.

The recharge is made via the USB-C port, located on the podmod's base, with a maximum charging current of 2A. The USB-C cable is included in the box.

You only need to connect to a USB-C port, then connect it to an external power source (powerbank, computer, or wall socket).

The USB-C port of Voopoo's Drag H40 Pro podmod

The 5ml PnP X MTL cartridge

The Drag H40 Pro is delivered with a PnP X MTL cartridge with a 5ml capacity.

This reusable cartridge works with a removable coil: when the latter is used, you need to change it with a new one.

The cartridge of Voopoo's Drag H40 Pro podmod

Two PnP X coils included

With the H40 Pro podmod, you get two PnP X coils, tailored to your vaping style and needs:

• 0.8ohm PnP X: recommended between 12 and 16W, for a tight, MTL-style draw
• 0.6ohm PnP X: recommended between 18 and 23W, for a restrictive semi-airy draw (RDL)

Additionally, the cartridge is compatible with the entire range of Voopoo PnP X coils.

Is your coil worn out? Here’s what you need to do to replace it:

1. Disconnect the cartridge from your podmod
2. Pull on the worn-out coil to remove it from the cartridge
3. Insert a new PnP X coil, pushing it in until it’s securely in place
4. Fill the tank with e-liquid, then wait 5 to 10 minutes before vaping

Adjustable airflow

An airflow ring, located at the top of the cartridge, allows you to manually adjust the airflow.

Simply rotate it to achieve a tighter or looser draw, depending on your preferences.

The airflow ring of Voopoo's Drag H40 Pro podmod

The filling of the Drag H40 Pro cartridge

Is this your first time filling your cartridge’s tank?

Here are a few simple steps to follow:

1. Remove the cartridge from the podmod
2. Remove the silicone cap on the side of the cartridge
3. Insert the tip of your e-liquid bottle and pour
4. Carefully replace the silicone cap
5. Reconnect the cartridge to the podmod

Since the coil is new, wait 5 to 10 minutes before vaping to allow the cotton to fully soak up the e-liquid.

Filling system of the cartridge on Voopoo's Drag H40 Pro podmod

Box contents

• 1 2,450mAh Voopoo Drag H40 Pro podmod
• 1 5ml PnP X MTL cartridge
• 1 0.6ohm PnP X coil
• 1 0.8ohm PnP X coil
• 1 USB-C cable
• 1 user guide

The Drag H40 Pro podmod is made by Voopoo.

Box contents of Voopoo's Drag H40 Pro podmod