Vaporesso XROS 6 Podmod

Vaporesso expands its XROS collection with the XROS 6 podmod, a compact electronic cigarette that has a 1,800mAh battery and two 3ml tanks.

This kit suits vape beginners as well as experts looking for an easy-to-use and intuitive podmod with handy features.

Delivered with two XROS Corex 3.0 cartridges of 3ml with sealed coil (0.6 and 0.8ohm), the XROS 6 enables you to vape in MTL or RDL according to the cartridge used and the airflow setting.

Vaporesso's XROS 6 podmod

The design of XROS 6 podmod

The XROS 6 continues the legacy of the XROS collection with a long silhouette measuring 122x24.5x14.5mm.

Its very compact format eases its transport in daily life, in a pocket or a bag.

As for the main panel, it features a 0.88" TFT screen that displays vaping information: battery level (as a percentage), the selected mode, and the podmod's lock status.

On one side are the fire button and the USB-C port for charging, while the opposite side has the adjustable airflow slider.

Handling of Vaporesso's XROS 6 podmod

All the settings of your XROS 6

Simple to use, all the settings are made via the fire button placed on the podmod's side.

Using this button, you can:

• 2 presses: go directly to the menu
• 3 presses: switch modes
• 4 presses: lock and unlock your podmod
• 5 presses: turn the podmod on or off

In addition, the XROS 6 offers three operating modes to suit your vaping style:

• POWER (PWR): for maximum power
• NORMAL (NOR): for balanced everyday use
• ECO (ECO): to conserve battery life

To switch between modes, you have two options:

• Either using the fire button: press the fire button 3 times to enter the mode selection menu, then press it once to scroll through the available modes. Once the desired mode is displayed, wait a few moments: the podmod will lock it in automatically
• Or using the Quick Draw system: take two quick puffs on the cartridge to switch between modes. Similarly, once the desired mode is selected, wait a few moments for the podmod to lock it in automatically

The Prime Coil features

After filling your cartridge with e-liquid, you can easily prime the coil using the Prime Coil feature before you start vaping.

Here's how to do it:

1. Fill your cartridge with e-liquid
2. Access the menu by pressing the fire button twice, then navigate to the PRIME COIL option
3. Hold down the fire button for 3 seconds to activate the function
4. Wait 60 seconds for the coil to prime properly
5. Hold down the fire button again for 3 seconds to deactivate the function

Your coil is now properly primed, and your podmod is ready to use.

The screen of Vaporesso's XROS 6 podmod

A 1,800mAh capacity

The XROS 6 podmod is equipped with a 1,800mAh built-in battery, capable of delivering up to 30W of power.

Recharging is made via the USB-C port thanks to a cable included in the box. According to the 5V/3A compatibility, the podmod is entirely recharged in 10 minutes.

The USB-C port of Vaporesso's XROS 6 podmod

The XROS Corex 3.0 cartridges

The XROS 6 kit is delivered with two XROS cartridges including the Corex 3.0 technology made by Vaporesso.

With a 3ml capacity, these cartridges have non-removable sealed coils. When the coil is used, you can change the whole cartridge.

The cartridge of Vaporesso's XROS 6 podmod

Two sealed coils

Each of the two tanks is equipped with a sealed coil.

With the podmod, you'll receive:

• A 0.6ohm XROS cartridge (pre-installed): suited to a restrictive direct inhalation (RDL)
• A 0.8ohm XROS cartridge: suited to vaping in indirect inhalation (MTL)

The XROS 6 podmod is compatible with all the 2ml and 3ml XROS cartridges by Vaporesso.

A VENTURI airflow

Your XROS 6 includes an adjustable airflow enabling you to vary the draw according to your needs.

Called VENTURI, it enables a regular draw with a better flavor rendering, all without any noise during inhalation.

The slider located on one of the podmod's edges allows you to open or close the air intakes to adjust the draw between a tight draw (MTL) and a more open draw (RDL).

The airflow of Vaporesso's XROS 6 podmod

How to fill the XROS 6 cartridge?

The cartridges are filled from the top, without having to remove them from the podmod. Here are the steps to follow:

1. Remove the mouthpiece (drip tip) from the cartridge
2. Insert the tip of your bottle into the fill port; be careful not to let any liquid spill into the central chimney
3. Pour your e-liquid up to the maximum capacity of 3ml
4. Replace the drip tip
5. If using a new cartridge, wait a few minutes before vaping to allow the coil to prime properly

Filling system of the cartridge on Vaporesso's XROS 6 podmod

Box contents

• 1 1,800mAh XROS 6 podmod
• 1 0.6ohm 3ml XROS Corex 3.0 cartridge
• 1 0.8ohm 3ml XROS Corex 3.0 cartridge
• 1 USB-C cable
• 1 user guide

The XROS 6 podmod is made by Vaporesso.

Box contents of Vaporesso's XROS 6 podmod