Aspire Pixo Ultra Podmod

Are you looking for a compact and simple-to-use electronic cigarette?

Here is for you the Aspire Pixo Ultra podmod, a podmod capable of delivering up to 30W of power in a pocket format. You'll have the choice between an autodraw and a manual system.

This kit is equipped with a built-in battery with a 1,500mAh capacity. The latter is not only rechargeable by USB-C, but also by induction!

The Pixo Ultra also has a Bluetooth connection, enabling you to set it in your phone.

Its cartridge with a sealed coil has a 3ml tank.

Aspire's Pixo Ultra podmod

A compact podmod

The Pixo Ultra stands out by its square format with restricted dimensions of 69.8x53.4mm for a weight of 108g.

It has a large touch-sensitive TFT screen giving you access to several setting modes.

Its Pixo cartridge is held in its compartment thanks ot a magnetic connection system.

Handling Aspire's Pixo Ultra podmod

How does the Pixo Ultra podmod work?

This electronic cigarette stands out due to its large panel of technologies.

Its touch-sensitive TFT screen displays all the necessary information for optimal flavor rendering.

It allows you to choose between two possible setting modes:

• SMART mode: let the chipset automatically set the power according to the coil
• WATT mode: manually set the power, from 5 to 30W

The Pixo Ultra also has Bluetooth, via Aspire's ASPR app (IOS and Android), so you can control your e-cigarette from your phone:

• Theme and animation customization
• Activation and deactivation of haptic feedback (vibrations)
• Vape statistics
• Setting of operation mode (SMART or WATT)
• Setting of activation mode: automatic, manual, or both (A, B, AB)

The screen of Aspire's Pixo Ultra podmod

A dual recharging system: USB-C or induction

Despite a very compact format, the Pixo Ultra has a 1,500mAh built-in battery.

Its battery level is indicated on the TFT screen.

To recharge your electronic cigarette, two solutions are possible:

• Use the USB-C cable included in the box: the recharging port is located on one of the podmod's sides
• Choose the induction charging system: get yourself a charging station (not included) and simply put your Pixo Ultra on it to charge it up to 100%

The USB-C port of Aspire's Pixo Ultra podmod

The cartridge of Pixo Ultra podmod

The Pixo Ultra has a 3ml e-liquid capacity.

Aspire joins two cartridges on the box, with different values (0.4ohm and 0.6ohm), with one pre-installed on the podmod.

The cartridge of Aspire's Pixo Ultra podmod

A versatile draw

The Pixo Ultra podmod is delivered with two Pixo cartridges:

• 1 0.4ohm Pixo cartridge: to use between 23 and 30W, for a semi-airy draw in restrictive direct inhaling (RDL)
• 1 0.6ohm Pixo cartridge (pre-installed): to use between 14 and 19W, for a tight vape in indirect inhaling (MTL)

Once the sealed coil is used (loss of flavors, light burnt taste), you only have to replace the cartridge with a new one.

Adjustable air intakes

According to the type of draw desired, you'll have the possibility to adjust the airflow via the airflow button located on the podmod's side.

Slide this button to free more or less of the holes and alternate between a tight vape and an airier draw.

The airflow button of Aspire's Pixo Ultra podmod

A 3ml tank

When the time comes to fill your Pixo Ultra podmod with e-liquid, you only need to:

1. Take the cartridge off the magnetic base
2. Lift the silicone strip located on the tank's side
3. Insert the bottle tip into the filling hole
4. Softly pour your e-liquid
5. Carefully close the strip

Is your cartridge new? Wait for a few minutes before vaping so the coil is correctly primed with e-liquid.

Filling of Aspire's Pixo Ultra podmod

Box contents

• 1 1,500mAh 30W Pixo Ultra podmod
• 1 0.6ohm Pixo cartridge (pre-installed)
• 1 0.4ohm Pixo cartridge
• 1 USB-C cable
• 1 user guide

The Pixo Ultra podmod is made by Aspire.

Box contents of Aspire's Pixo Ultra podmod