Aspire Loomix Podmod

The simple automatic podmod made for beginners! Discover the Loomix podmod by Aspire in this video!

Are you looking for an electronic cigarette that matches performance and simplicity of use in a compact format? Find it here.

The brand Aspire offers its Loomix podmod. This kit has a built-in battery with a 1,500mAh capacity and works with a 3ml cartridge that is easily refillable from the top.

Its tank is equipped with a sealed coil rated at 0.6ohm, suitable for both tight draws with indirect inhalation (MTL) or semi-direct inhalation (RDL), depending on how you adjust the airflow.

Designed specifically for both beginner and experienced vapers, the Loomix comes fully configured by the manufacturer: simply inhale through the mouthpiece to vape.

Plus, its slim design makes it an easy-to-carry podmod, ready to accompany you throughout the day.

The Loomix podmod by the manufacturer Aspire

The design of the Loomix podmod

The Loomix podmod weighs 65g and measures 112 x 25.8 x 15 mm.

Thanks to its rectangular and flat format, the Loomix has good handling and is easily slid into a pocket or a bag.

On your podmod, you'll find:

• A digital screen on the main side
• An adjustable airflow on the side
• A unique button and a USB-C port on the opposite side

Handling of Aspire's Loomix podmod

A simple functioning

The podmod is equipped with an auto-draw system without a Fire button. In other words, you only have to inhale the mouthpiece to vape it.

However, there is still a very useful single button located above the USB-C port on one of the side edges.

With this button, you can:

• 1 press: turn on the screen to check the remaining battery life in real time
• 3 presses: switch between Normal mode, which conserves battery life, and Boost mode, which increases power for a more intense vape
• 5 presses: turn your Loomix podmod on or off

For your convenience, note that the coil’s power automatically adjusts based on the cartridge installed in your podmod.

The screen of Aspire's Loomix podmod

A built-in, USB-C 2A rechargeable battery

The Loomix podmod features a built-in battery with a 1,500mAh capacity.

Check your e-cigarette’s battery level in real time using the display on the front of the podmod, which can be accessed with a quick press of the single side button.

Use the USB-C cable provided by Aspire to recharge your Loomix podmod when the battery is low. Plus, fast charging lets you get a full battery in just 45 minutes at 2A, according to the manufacturer.

Find the USB-C port on the side of the podmod, located below the single button.

The USB-C port and the unique button of Aspire's Loomix podmod

The Loomix cartridge

Made from transparent PCTG, the Loomix cartridge lets you check your e-liquid level at a glance and refill before you risk getting a dry hit.

Aspire includes a Loomix cartridge in your box with a sealed 0.6ohm coil and a 3ml capacity, already pre-installed on your podmod.

The cartridge of Aspire's Loomix podmod

A sealed coil

The cartridge included with your Loomix kit features a sealed coil rated at 0.6ohm.

It is particularly well-suited for semi-airy (RDL) or indirect (MTL) vaping, depending on your airflow setting.

After a few weeks of use, signs of wear may appear: loss of flavor, a slight burnt taste. In this situation, it’s time to replace your cartridge with a new one, making sure to dispose of the used one in an appropriate collection bin.

The Loomix podmod is also compatible with all Loomix cartridges offered by Aspire.

An adjustable side airflow

Because every vaper has their own preferred draw, Aspire equips your Loomix with an airflow adjustment slider, located on one of the podmod’s side edges.

Slide it to tighten or open your draw as needed: upward for a tighter draw in indirect (MTL) vaping, or downward for a more open draw in semi-direct (RDL) vaping.

The airflow of Aspire's Loomix podmod

A convenient top-fill system

Aspire has equipped its Loomix with a 3ml tank that can be refilled from the top (top-filling) without having to remove the cartridge from the podmod.

To refill your Loomix cartridge, please follow the steps below:

1. Remove the mouthpiece (top cap) from the cartridge
2. Insert the tip of your e-liquid bottle into the filling port
3. Fill with e-liquid to the desired level
4. Replace the mouthpiece, making sure it is securely fastened to prevent any leaks

Warning: Wait at least ten minutes before vaping to allow the coil to properly soak up the e-liquid, especially when filling a new cartridge for the first time.

The filling system of Aspire's Loomix podmod

Box contents

• 1 1,500mAh Aspire Loomix podmod
• 1 Loomix cartridge with 0.6ohm sealed coil (pre-installed)
• 1 USB-C cable
• 1 user guide

Box contents of Aspire's Loomix podmod