Vaporesso Vibe SE 2 Podmod

The Vibe SE comes in version 2, equipped with a built-in battery of 1,400mAh.

For the use, Vaporesso made the functioning simple and handy: a sliding button enables alternating between vape modes (ECO or POWER).

This electronic cigarette has a Dual Mesh cartridge with a 4.5ml tank.

Vaporesso's Vibe SE 2 podmod

A sober look with a podmod format

With this second version of the Vibe SE, Vaporesso keeps a standard podmod format slightly longer than the predecessor: 121.1x27.1x18.1mm.

Particularly suited to vape beginners, this kit offers a minimalist conception for simple and intuitive use.

Find on your electronic cigarette:

• 1 LED color indicator
• 1 USB-C port
• 1 ECO / POWER mode interruptor

Handling of Vaporesso's Vibe SE 2 podmod

A simple and effective functioning

With the Vibe SE 2, no need to have knowledge in the vaping world.

Indeed, this podmod has a simplified functioning, offering only two vaping modes:

• ECO mode: this mode activates the 0.8ohm coil of the Dual Mesh cartridge, using a power of 14W for a tight draw in indirect inhaling (MTL)
• POWER mode: this mode uses the 0.6ohm coil, using a power of around 24 watts for a bit more airy vape in restrictive direct inhaling (RDL)

Once the functioning mode is selected, you only have to draw from the mouthpiece (auto-draw).

A 1,400mAh rechargeable battery

The Vibe SE 2 podmod has a 1,400mAh built-in battery offering a good vape capacity.

A colored LED light indicates the charge level of your e-cigarette:

• Green LED light: between 60 and 100% of capacity
• Blue LED light: between 10 and 60% of capacity
• Red LED light: less than 10% of capacity

Is the light red? Get a USB-C cable (not included) and connect it to the port located on the podmod's side.

Tip: Use the ECO mode to save battery life if needed!

The USB-C port of Vaporesso's Vibe SE 2 podmod

A cartridge with dual coils

For the Vibe SE 2, Vaporesso bets on a Dual MESH cartridge. In other words, the tank holds not one, but two sealed coils (0.6ohm and 0.8ohm).

According to the functioning mode selected (ECO or POWER), your podmod activates one or the other of these coils.

Once these used coils (loss of flavors, light burnt taste), you only have to change the cartridge with a new one to continue vaping on your Vibe SE 2.

This Vibe SE 2 cartridge has an e-liquid capacity of 4.5ml, offering great vape capacity.

The cartridge of Vaporesso's Vibe SE 2 podmod

A magnetic connection

This cartridge presents a magnetic base, enabling easy and quick connection to the base.

Don't hesitate to get a pack of spare Vibe SE cartridges if you wish to alternate the e-liquid flavors during the day!

The magnetic connection of the cartridge of Vaporesso's Vibe SE 2 podmod

A top-filling

This Vibe SE 2 cartridge has a handy top-filling system.

When you need to refill the 4.5ml tank with e-liquid, no need to take the cartridge off the podmod!

You only have to:

1. Lift the silicone strip
2. Insert the bottle tip into the filling hole
3. Softly pour your e-liquid
4. Close the strip

Do you use a new cartridge? Wait for some minutes before vaping so the coils are correctly primed with e-liquid.

Filling of Vaporesso's Vibe SE 2 podmod

Box contents

• 1 1,400mAh Vibe SE 2 podmod
• 1 4.5ml Vibe SE 2 DUAL MESH cartridge (0.6ohm/0.8ohm) (pre-installed)
• 1 user guide

The Vibe SE 2 podmod is made by Vaporesso. It is sold without a USB-C cable.

Box contents of Vaporesso's Vibe SE 2 podmod