OXVA XLIM Ultra 3 Podmod

Discover how the touch screen of the XLIM Ultra 3 podmod work in this A&L video

The brand OXVA presents the third version of the XLIM Ultra podmod: a kit with 30W of maximum power meant for expert and beginner vapers.

Its touch-sensitive HD color screen of 2.2" enables you to set and customize your electronic cigarette.

It also has a built-in battery with a 1,500mAh capacity rechargeable, thanks to its USB-C cable included.

For the vape, the podmod is matched with two XLIM Top Fill tanks of 3ml, each with a Unitech 2.0 sealed coil for optimal flavor rendering.

OXVA's XLIM Ultra 3 podmod

A podmod with a big HD touchscreen

The third version of the podmod follows the lines of the XLIM range, with a slim and ergonomic design.

Its dimensions of 122x29x17mm ensure a good grip and allow you to easily store it in your pocket or bag.

OXVA has also equipped this model with a 2.2-inch HD color screen.

The screen has a resolution of 220×700 pixels, a sharpness of 331 PPI, and a refresh rate of 60Hz, comparable to that of a smartphone.

In addition, its Nano SiO coating and anti-fingerprint treatment ensure greater durability and consistent visibility for everyday use.

Handling of OXVA's XLIM Ultra 3 podmod

The functioning of the XLIM Ultra 3 kit

This OXVA podmod was designed for use both simple and customizable. To turn it on, you only have to press succesively five times the Fire button.

In terms of power management, the chipset automatically adjusts the power according to the cartridge installed. 

You can then vape by pressing the fire button or simply by inhaling through the mouthpiece thanks to its auto-draw system.

The podmod has a side switch that locks the device to prevent accidental pressing and maintain the auto-draw function.

In addition, you can choose between two vaping modes:

• Super Pulse: this mode enhances flavor delivery with each puff, even when the battery is low
• Eco mode: this optimizes energy consumption to extend your battery life

To switch between modes, use the touchscreen to navigate the settings.

For even more customization, you can:

• Change the display theme from the three available graphic interfaces
• Select one of four screen animations
• View detailed consumption tracking (number of puffs per day, week, or month)
• Check the battery level, coil value, and current power
• Choose the display language
• Unlock the touchscreen

The screen of OXVA's XLIM Ultra 3 podmod

A built-in battery with great capacity

For the third version of the XLIM Ultra, OXVA provides a podmod equipped with a 1,500mAh built-in battery.

As a reminder, the touchscreen HD screen indicated the percentage of capacity left in real time.

If the latter indicated a low battery? Don't panic.

Get the USB-C cable included, connect it to the 5V/2A port located on the podmod's bottom, then reconnect it to the power source (wall socket, external battery, or computer).

OXVA indicated that you can reach 80% of charge in only 30 minutes. 

The USB-C port of OXVA's XLIM Ultra 3 podmod

2 XLIM Top Fill cartridges

Upon receipt of the kit, you'll receive the podmod with two XLIM Top Fill cartridges with a 3ml capacity.

They are equipped with a sealed coil.

Thanks to their Top Fill system, you don't need to take the cartridge off to fill it.

There is a silicone tab, hiding the filling hole, on the side of the cartridge.

The Top Fill 3ml cartridge of OXVA's XLIM Ultra 3 podmod

A built-in mesh coil

The two cartridges are equipped with a sealed coil.

Handy, once they are used, you only have to change the whole cartridge with a new one.

With two coils of different values, OXVA offers to choose the vaping style that suits you best:

• Top Fill 3ml cartridge (0.6ohm): for an airier vape (RDL), between 20 and 25W
• Top Fill 3ml cartridge (0.8ohm): for a tighter draw (MTL), between 12 and 16W

Adjustable airflow system

The XLIM Ultra 3 is equipped with a lateral button enabling you to set the airflow according to your preferences.

Open the airflow more to get an airier vape, or reduce it for a tighter draw and concentrated flavors.

The airflow of OXVA's XLIM Ultra 3 podmod

How to fill the podmod's tank?

Thanks to its Top Fill system, the XLIM 3ml cartridge is filled from the top. Handy, you don't need to take the cartridge off the podmod to do it.

To fill it, you only have to use a bottle of e-liquid with a thin tip, then:

• Softly lift the silicone tab located on the cartridge's side
• Insert the thin tip of your bottle into the hole
• Softly pour the e-liquid
• Carefully close the strip

If the cartridge is new, we recommend letting the coil sit for at least ten minutes before the first use.

Filling of OXVA's XLIM Ultra 3 podmod

Box contents

• 1 XLIM Ultra 3 podmod
• 1 XLIM Top Fill 0.6ohm cartridge
• 1 XLIM Top Fill 0.8ohm cartridge
• 1 USB-C cable
• A user guide

The XLIM Ultra 3 podmod is made by OXVA.

Box contents of OXVA's XLIM Ultra 3 podmod