Geekvape Digi Max Podmod

An intuitive and versatile podmod, ideal for all vapers to discover in this video: the Digi Max podmod.

Geekvape offers a performing and intuitive podmod with a 3,000mAh built-in battery with a maximum power of 80W.

Delivered with a JR cartridge with a removable coil, the Digi Max is also compatible with the J cartridge with a sealed coil (not included).

Its 5ml coil has a quick and handy lateral filling.

The Digi Max podmod has a touchscreen giving you access to several modes, including a manual power setting.

This intuitive kit is meant for beginners as well as expert vapers thanks to its large draw versatility and ease of use.

Geekvape's Digi Max podmod

A high-quality touchscreen

For the conception of the Digi Max, Geekvape innovates by combining the zinc alloy with an "In-Mold Label" technology, a molding particularly resistant to corrosion and wear.

With a standard podmod format, the Digi Max presents dimensions of 112.16x34.18x26.3mm for a weight of 122.8g.

The podmod's front panel features a 1.47” color TFT touchscreen, surrounded by two RGB LED strips for a bright effect, especially when inhaling.

Handling of Geekvape's Digi Max podmod

4 functioning modes

Intuitive and performing, the Digi Max offers no less than four functioning modes to select through the touchscreen:

• SMART mode: automatic power adjustment according to the type of coil used
• CUSTOM mode: manual power adjustment, from 5 to 80W
• BOOST mode: automatic adjustment of the maximum power supported by the coil
• ECO mode: automatic adjustment of the minimum power supported by the coil

Geekvape also lets you customize the design of your podmod with 6 different animations of the side LED strips!

Finished with your touchscreen settings? Easily lock it using the switch beneath the podmod to prevent unintentional manipulation.

Now all you have to do is vape by pressing the Fire switch or by inhaling directly into the cartridge mouthpiece!

The touchscreen of Geekvape's Digi Max podmod

3,000mAh of capacity!

Geekvape has succeeded in bringing you an 80W podmod with a 3,000mAh built-in battery.

The battery can be recharged quickly and easily via USB-C: the manufacturer guarantees a 50% charge in just 20 minutes.

The charging port is located beneath the podmod, next to the power switch. The USB-C cable is included in the Digi Max podmod box.

The USB-C port and locking system of Geekvape's Digi Max podmod

The JR cartridge of Digi Max podmod

Your Digi Max podmod is equipped with a JR cartridge with a removable coil, in other words, once the coil is used, no need to throw the cartridge out. You only have to replace the coil by a new one to use your e-cigarette!

This cartridge has a 5ml tank and is magnetically connected to the podmod, ensuring optimal handling while allowing a quick change of cartridge!

Your Digi Max podmod is also compatible with the Jr cartridges with sealed coils.

The JR cartridge of Geekvape's Digi Max podmod

Two J Coils included

Geekvape adds two J Coils to the Digi Max podmod's box:

• 1 0.4ohm J coil: for a semi-aerial vape in restrictive direct inhaling (RDL), to use between 23 and 28W
• 1 0.6ohm J coil: for a rather tight draw in indirect inhaling (MTL), to use between 16 and 21W

Upon receiving your podmod, select the value that suits you according to your vape preferences, then:

1. Unwrap the new coil
2. Disconnect the cartridge from the magnetic base
3. Soak the coil with some e-liquid drops
4. Insert it in its compartment below the cartridge
5. Replace the cartridge on the podmod
6. Fill the tank with e-liquid
7. Wait for some minutes before vaping so the coil is correctly primed

An airflow button on the cartridge

Here, the airflow setting is not on the podmod, but directly on the cartridge for more efficiency.

To alternate between a tight vape and a cloudy draw, use the sliding button located on the tank's side.

Please note that the more you free the air intakes, the more airy the vape.

The airflow button on the cartridge of Geekvape's Digi Max podmod

A handy side-filling

Geekvape made sure that the Digi Max eased the 5ml filling of the tank.

No need to take the cartridge off the podmod to fill it with e-liquid!

For this:

1. Get a bottle with a thin tip
2. Lift the silicon strip on the side of the cartridge
3. Insert the bottle tip
4. Softly pour your e-liquid
5. Close the strip
6. Wait for some minutes before vaping so the coil is new

The filling of the JR cartridge on Geekvape's Digi Max podmod

Box contents

• 1 3,000mAh 80W Digi Max podmod
• 1 JR cartridge (pre-installed)
• 1 0.4ohm J Coil
• 1 0.6ohm J Coil
• 1 USB-C cable
• 1 user guide

The Digi Max podmod is made by Geekvape.

Box contents of Geekvape's Digi Max podmod