SXmini SL Class V2 Mod

Second of the series, the SL Class V2 mod made a strong appearance in the world vape. With unquestionable quality, its unique and modern look pleases as much as its electronic performance.

Much more than an ergonomic mod, the SL Class V2 chooses quality by taking the Yihi SX730J chipset, one of the best in the market. Up to 100 watts of power thanks to a single 18650, 20700, or 21700 battery (not included), next-generation vaping modes, and a responsive joystick that works like a navigation button, all in the SL Class V2 mod is perfectly made for you!

You only need to find a friend for it. On the 510 connector, you can install all clearomizers, atomizers, or drippers with a 28mm diameter maximum.

SXmini's SL Class V2 mod with Wotofo's Gear V2 RTA atomizer

Restyled design, mod with a unique look

In the direct continuity of the SL Class mod, this second version keeps the general look of the first one, while keeping its share of aesthetic innovations.

Its size is the same - 89.1mm in height, 30.17mm in width, and 42.95mm in depth - for an optimal and light grip (136 grams without battery).

It keeps a massive look but with more noble materials (stainless steel, aluminium, and zinc alloy). And, the corners are more rounded for a more curved, fine, and modern design.

The SL Class V2 mod by SXmini

An electronic mod that uses all its potential

To offer you the most complete choice of vape modes, the SL Class V2 mod takes one of the best chipsets in the vape world: the Yihi SX370J.

With it, enjoy up to 100 watts of power, a Temperature Control of the fourth generation, the Buck Boost technology, and nice innovations of the Curve mode!

Always efficiently protected by a choice of electronic securities, with an interface and a navigation joystick!

Wattage, Voltage, TC, and TCR of fourth generation and flavors!

Vape beginners, temperature control enthusiasts, or those curious about Yihi chipsets, each one will find happiness in the SL Class V2 mod. To ensure it, SXmini gave it a ton of nice and qualitative functionalities :

1. Wattage mode: manual adjustment of the power in watts, from 5 to 100W.
2. Voltage mode: manual adjustment of voltage in volts.
3. TC and TCR mode: Temperature Control of the fourth generation is more precise, reliable, and intelligent. Possibility to use with SS316L Ni200 or TCR wires. Vape options "Constant" or "Dynamic". 5 intensity levels, from "Cold" to "Hot". Buck Boost technology for a constant feeling, even on low battery.
4. Curves mode: accessible for all the previous vape modes. Amplification of flavors with 3 pre-installed parameters or on custom parameters (curves SXi-EQ).

TFT screen of quality and navigation joystick

The navigation interface was totally restyled. The 0.96-inch TFT screen is more clear, organized and readable for an optimized vaping experience. The mod works - like the previous version - with the help of a responsive joystick, just under the screen.

By pushing one time on the joystick, you'll access the parameters of the current mode. By pushing to the right for 4 seconds, you'll reach the main menu. Then, by pushing to the left, you'll go to the previous page.

N.B: In Wattage and Voltage mode, you'll confirm the entry of watts or volts by pushing the joystick to the left.

The 0.96" TFT screen of the SL Class V2 mod by SXmini

A single-18650, 20700, 21700 battery operation!

With SXmini, the choice is yours! Besides taking the most used battery (18650), your SL Class V2 mod can also be a 20700 or 21700 battery.

However, if you choose a single 18650 battery, you'll need an adaptor included in your box.

The place of your battery is under the mod. Unscrew the button protecting the access inside of your SL Class V2 and you'll find the place of the single battery. There, insert the battery chosen with the positive side first. Screw, and you can vape!

The single-18650/20700/21700 battery compartment of the SL Class V2 mod by SXmini

The addition of the micro-USB-C port for recharging

On the SL Class V2 mod, all the essential components are on the main side. After the switch, the screen, and the navigation joystick, here is THE solution for backup recharging: a micro-USB-C port, in 5V/1A.

Matched with the cable included in your box, you can quickly recharge it - and everywhere - your electronic mod. You just need an external energy source, like a computer for example!

N.B: We remind you that this connection is not made to be used daily. For better durability of your batteries, favor recharging them with an adapted external charger (sold separately).

The USB-C port of the SL Class V2 mod by SXmini

Contents of the box

• An SL Class V2 mod
• An 18650 battery adaptor (pre-installed)
• A USB-C cable
• A user guide

The SL Class V2 is made by SXmini.

Contents of the box of the SL Class V2 mod by SXmini