Hellvape Dead Rabbit 4 RDA Dripper

The brand Hellvape comes back with a fourth version of its dripper (RDA), the Dead Rabbit 4. Its 24mm diameter enables it to easily suit most mods on the market.

This dripper offers a single coil as well as a dual coil build, thanks to a deck adapter included. It is delivered with two 810 drip tips, enabling an airy vape. Finally, its Bottom Feeder compatibility, using the supplied pin, offers the possibility of making the most of a large e-liquid stock.

The Dead Rabbit 4 RDA is particularly suited to direct inhaling (DL) or restrictive direct inhaling (RDL).

Hellvape's Dead Rabbit 4 RDA dripper with The Mind Flayer X Damn Vape's BF Atemporal 21 mod

The design of Dead Rabbit 4 RDA

Hellvape chooses a modern look by giving a clean style to the Dead Rabbit RDA!

Still boasting compact dimensions of 32.8x24mm and weighing only 42.8g, this dripper will pair with all your mods and boxes with a maximum diameter of 24mm.

If you're a fan of squonking, good news: the Dead Rabbit 4 RDA is Bottom-Feeder compatible and includes a BF pin!

Hellvape's Dead Rabbit 4 dripper

A deck built in a single or dual coil

The Dead Rabbit 4 stands out from the competition thanks to its compatibility with both single and dual-coil builds. The manufacturer offers an adjustment that allows for a more restrictive vape with a single coil.

In addition, the Dead Rabbit V4 has a flat deck with enlarged posts: this design makes coil installation easy, while optimizing airflow and the space available for your builds.

That's not all: Hellvape includes the dripper with all the equipment you need for your first build: cotton wick, Ni80 Fused Clapton 0.37ohm coil, coil trimmer, and more.

Follow our recommendations to easily build your coil:

1. Start by removing the cap: turn it until it stops, then pull to remove it; then remove the bell
2. Once the deck is free, unscrew the screws located in the posts
3. Then insert the legs of your coil (previously cut on the template), and screw them back in
4. Place the cotton wick directly into the coil and cut off the excess
5. Pour a few drops of e-liquid onto the cotton to prime it
6. Fold the cotton wicks into the tank so that they are properly saturated with e-liquid
7. Reattach the bell, then the cap

Note that the Dead Rabbit RDA is also included with a 510 drip tip adapter, allowing you to change the 810 mouthpiece with a 510 drip tip of your choice (not included).

The build deck of Hellvape's Dead Rabbit 4 RDA

20 holes of air intakes

Clearly designed for airy vape enthusiasts, the Dead Rabbit 4 RDA features an effective airflow adjustment system.

 With 20 air intake holes forming a honeycomb pattern, simply rotate the dripper's top cap to adjust the airflow to your liking. In addition, the Dead Rabbit 4 RDA also has three large airflow slots that offer an even more airy draw.

This allows you to easily switch between a very airy direct lung (DL) draw and a slightly tighter restrictive direct inhale (RDL).

The airflow system of Hellvape's Dead Rabbit 4 RDA

A BF pin included

Indulge in squonking thanks to the Dead Rabbit 4 RDA's compatibility with bottom feeding!

This dripper is included by Hellvape with a BF pin. Simply insert it in place of the 510 pin to squonk, but also to benefit from an e-liquid reserve!

For use without BF, Hellvape has equipped its dripper with a tank, which still allows for a small e-liquid stock. This system means you don't have to wet the cotton with every puff.

Box contents

• 1 Dead Rabbit 4 RDA
• 1 810 drip tip in metal (pre-installed)
• 1 810 drip tip in Ag+
• 1 adapter for 510 drip tip (not included)
• 1 BF pin
• 2 0.37ohm Fused Clapton Ni80 coils
• 2 cotton laces
• 1 coil trimmer
• 1 set of tools and accessories
• 1 user guide

The Dead Rabbit 4 RDA dripper is made by Hellvape.

Box contents of Hellvape's Dead Rabbit 4 RDA dripper