Titanide Cerakote Apogée 1.5 Clearomizer

Discover the high-performance Apogée 1.5 clearomizer in a Cerakote edition!

Retaining all the qualities of the original version, it is designed for a rather tight draw with indirect inhalation (MTL) or even restrictive direct inhalation (RDL).

Designed to accommodate Titanide Apogée coils, this clearomizer is also compatible with Aspire BVC coils.

Its 3.6ml tank, or 4.5ml with the replacement Pyrex glass, can be filled quickly and easily from the top.

The Cerakote Apogée 1.5 clearomizer with the BD Vape's Limited Edition Rayden 100 V2.0 mod

Cerakote for a high-end version

The Apogée 1.5 is available here in its Cerakote edition, made from a high-tech ceramic coating.

This paint not only offers undeniable aesthetic appeal, but also protects this clearomizer from abrasion, wear, and corrosion.

With a diameter of 24mm, it will connect to all your mods equipped with a standard 510 pin.

The Apogée 1.5 Cerakote clearomizer measures 46.8mm in height, featuring a 510 Ultem drip tip.

Titanide's Cerakote Apogée 1.5 clearomizer

The Apogée coils

This clearomizer comes with two Apogée coils with different values:

• 1 Apogée coil at 1.0ohm: to be used between 10 and 20W, for a tight vape with indirect inhalation (MTL)
• 1 Apogée coil at 0.6ohm: to be used between 20 and 30W, for a slightly more airy draw with restrictive direct inhalation (RDL)

Note that Titanide also makes its Cerakote Apogée 1.5 compatible with Aspire BVC coils.

How to change your coil?

At the first signs of wear on your coil, such as a loss of flavor or a slight burnt taste, you should replace it.

To do so:

1. Unscrew the bottom part of the clearomizer
2. Remove the used coil
3. Soak a new coil with a few drops of e-liquid
4. Insert this coil into its housing in place of the old one
5. Screw the bottom part of your Cerakote Apogée 1.5 back on
6. Fill the tank with e-liquid
7. Wait 5 to 10 minutes before vaping to allow the new coil to prime properly

Adjustable air intakes

To personalize your vaping experience with the Apogée 1.5 Cerakote, Titanide has equipped it with an airflow ring.

Located under the lower part of the clearomizer, it allows you to open or close the air intake holes.

Then easily switch from a tight vape to a more airy draw by simply rotating this airflow ring!

The airflow of Titanide's Cerakote Apogée 1.5 clearomizer

An easy top filling

With this Cerakote edition, Titanide retains the top-fill system of the Apogée 1.5, i.e., from the top of the tank.

Quickly and cleanly refill the 3.6ml Cerakote tank or the 4.5ml replacement Pyrex tank included in the box with e-liquid!

To do this:

1. Unscrew the top part of the clearomizer (top cap)
2. Insert the narrow tip of your bottle into one of the two filling holes
3. Pour in your e-liquid
4. Screw the top cap back on

Is your coil new? Wait a few minutes before vaping to allow it to properly absorb the e-liquid.

Filling Titanide's Cerakote Apogée 1.5 clearomizer

Box contents

• 1 3.6ml Cerakote Apogée 1.5 clearomizer
• 1 1.0ohm Apogée coil
• 1 0.6ohm Apogée coil
• 1 4.5ml spare Pyrex
• 1 spare drip tip
• 1 set of spare pieces
• 1 user guide

The Cerakote Apogée 1.5 clearomizer is made by Titanide.

Box contents of Titanide's Cerakote Apogée 1.5 clearomizer