Smok T-Air Subtank Clearomiser
A leakproof sub-ohm clearomiser with a 5ml bulb tank
-
Diameter26mm
-
Volume5ml
-
Height51.7mm
-
Brand
Discover everything you need to know about Smok's T-Air Subtank clearomiser in this video!
Smok presents the T-Air Subtank, a clearomiser dedicated specifically to DTL (Direct-To-Lung) vaping, which is ideal for cloud-chasing vapers. Its 510 pin will allow you to install it onto any mod that can accommodate a diameter of 26mm.
The T-Air Subtank is equipped with a 5ml bulb tank and comes with 5 spare gaskets, so that your tank is airtight at all times.
Smok’s T-Air Subtank clearomiser on Lost Vape’s Thelema Quest Solo 100W mod
An effective clearomiser
The T-Air Subtank clearomiser looks both elegant and robust, and is clearly designed for a comfortable direct inhale (DTL) use. It’s 51.7mm tall and 32mm wide (with the bulb tank), so it’ll easily go on any mods that can accommodate this width.
Smok’s T-Air Subtank clearomiser
Compatible with Smok’s TA coils
The T-Air Subtank clearomiser is compatible with Smok's TA coils.
The latter are made of mesh and produce good vapour, along with nice flavours.
Smok offers its clearomiser with two Smok TA 0.2ohm coils (one of which is pre-installed), to be used between 50 and 70W.
Once the coil is worn out (after about two or three weeks’ use), you can change it as follows:
- Remove the clearomiser from your mod by unscrewing it
- Then unscrew its base to access the old coil
- Remove it by simply pulling on it
- Prime a new coil by soaking the cotton mesh with a few drops of e-liquid
- Gently insert the new coil in its slot
- Fill your tank with e-liquid and wait 5 to 10 minutes before vaping
An adjustable top airflow
As mentioned above, the T-Air Subtank is perfectly leakproof, thanks to its 5 gaskets. And to be extra sure that no liquid would leak from the device, Smok has designed its clearomiser with an adjustable top air intake.
The latter has a large honeycomb intake, ensuring optimal airflow and flawless flavour rendition every time.
The top-airflow system of Smok’s T-Air Subtank clearomiser
A 5ml top-fill tank
Not only can the T-Air Subtank clearomiser hold a great amount of e-liquid (5ml) thanks to its bulb tank, but it also features a very useful top-fill system. Thanks to this ingenious design, and combined with the top airflow, Smok offers you long hours of leak-free vaping, with plenty of flavours and clouds!
Follow our tips for quickly and easily filling the tank:
- Unscrew the clearomiser’s top cap by a quarter turn
- Gently insert the tip of your bottle of e-liquid into one of the two holes on either side of the chimney
- Fill the tank up to three quarters (never to the brim)
- Screw the cap back on by a quarter turn
- Remember to wait 5 to 10 minutes if you’re using a new coil
Be careful to never pour liquid into the middle chimney!
The top-fill system of Smok’s T-Air Subtank clearomiser
Contents
- The T-Air Subtank clearomiser
- A spare 5ml Bulb Pyrex tank
- Two 0.2ohm TA coils (one of which is pre-installed)
- A set of spare parts
- A user guide
The T-Air Subtank clearomiser is manufactured by Smok
Contents of the box of Smok’s T-Air Subtank clearomiser
Diameter | 26mm |
---|---|
Volume | 5ml |
Height | 51.7mm |
Material | Stainless steel |
Width | 32mm |
Compatible coils | Smok TA |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |