Evod Ego Twist II Mod

Looking for a really straightforward electronic mod to start vaping? Then, the Ego Twist II Evod battery is made for you!

This device is compatible with all the eGo clearomizers, has a good capacity of 1300mAh, and a variable voltage operation, that is to say, you can adjust the voltage following several increments, from 3.3 to 4.8V.

A very handy tube mod

The Ego Twist II Evod battery has the iconic shape of the first electronic cigarette, namely a beautiful cylinder!

This tubular mod is 120mm high (110mm if you leave the eGo connector out) and only 16mm in diameter. It’s made from high-quality stainless steel and has a simple but effective design, adorned with either plain or brighter colors.

Therefore, it's easy to carry the mod around with you. It’ll easily fit in your pocket and your hand. You can connect all types of eGo clearomizers to it as well, as long as they are no wider than 16mm!

The Ego Twist II Evod battery

A knurled ring for adjusting the voltage

The Ego Twist II Evod battery operates with a variable voltage, which means that this voltage can be adjusted if you wish.

On the lower part of this tubular mod is a knurled ring with, just above it, all the voltage settings you can choose from:

• From 3.3 to 3.6V
• From 3.6 to 4.3V
• From 4.3 to 4.8V

The voltage adjustment ring of the Ego Twist II Evod battery: from 3.3 to 4.8V

Each increment corresponds to a different notch. You will hear a ‘click’ every time you reach the 3.3V, 3.6V, 4.3V or 4.8V increments.

Of course, the Ego Twist II Evod is equipped with an electronic chipset that has all the essential safety protections.

In order to vape, simply press the power switch. Press this same button 5 times in a row to turn the device on or off.

Note that this mod can accommodate any coil of 0.5 to 3 ohms maximum.

The power switch of the Ego Twist II Evod mod

A 1300mAh battery that’s easy to charge

The Ego Twist II Evod will provide you with quite long vaping sessions, thanks to its 1300mAh built-in battery!

To charge the device, you have to remove the eGo clearomizer that you’ve installed on it. Indeed, the charging port is the same as the eGo connector. Therefore, you will also need a specific charger for eGo batteries (sold separately).

The Ego Twist II Evod battery comes without any accessories.