Early Bird Emperor RTA Atomizer

A&L presents you the Emperor RTA in details in this video!

The manufacturer Early Bird offers a high-end RTA atomizer with a base diameter of 30mm, enabling it to be associated with several large mods available on the market.

Thanks to its large postless deck, you'll easily make your builds in dual coil. Furthermore, the manufacturer specifies that it is possible to install a single coil.

For the e-liquid capacity, the tank holds up to 6.5ml of e-liquid, according to the Pyrex (straight or bulb) that you decide to install. Early Bird chose a handy top-filling system, enabling you to quickly recharge your tank without taking it off.

This atomizer also has two wide-bore 810 drip tips and large airflow windows for a very airy draw in direct inhaling (DL).

Early Bird's Emperor RTA atomizer with Geekvape's Aegis L200 Classic mod

The design of the Emperor RTA atomizer

This atomizer has a 30mm diameter, a 38.4mm height, and adapts to all mods with a standard 510 pin. According to the Pyrex you install, the width of the tank changes: 31mm with the straight Pyrex and 34mm with the bulb Pyrex.

The Emperor RTA is also equipped with two 810 drip-tips (short and long), both made for a very airy draw in DL (direct inhalation).

Made in SS316 stainless steel, this atomizer is sturdy.

Early Bird's Emperor RTA atomizer

A large postless deck

Known to ease your builds, the Emperor RTA has a postless deck. It can accommodate two coils up to 3.5mm in diameter, for an airy draw in direct inhaling (DL). This deck also features two wells to facilitate wicking, as well as a central ventilation grid with two openings.

Note that the manufacturer states that a single coil setup is possible up to 5mm in diameter. 

The deck then accommodates one of the two chambers provided, each with 12 airflow openings (one of which has two more restrictive openings), before being covered by the bell.

To assemble your first coil with this deck, follow these steps:

1. Position the legs of your coils in the designated compartments
2. Heat your coils
3. Insert your cotton into the coils
4. Cut off the excess cotton, aligning it with the edges of the atomizer
5. Air out the cotton
6. Slide the cotton wicks into the grooves
7. Soak the cotton with e-liquid
8. Replace the chamber on top of the assembly, then the bell

The postless deck of Early Bird's Emperor RTA atomizer

A top airflow with 38 openings

For the airflow, the Emperor RTA bets on a system of adjustable top airflow via a rotary ring with 38 openings in a honeycomb shape.

You can vary the draw according to needs, from very airy to more restrictive.

Associated with two 810 drip tips included (short and long), the atomizer offers a totally customized experience, with a thick vapor in DL and optimal aromatic result.

The airflow of the Early Bird's Emperor RTA atomizer

From 5 to 6.5ml of capacity, top-filling

As for the tank, the Emperor RTA comes with a pre-installed straight Pyrex glass tube, offering a capacity of 5ml.

For those looking for extended autonomy, a bulb Pyrex is also available, bringing the total capacity up to 6.5ml of e-liquid.

Whichever option you choose, filling is done from the top (top-filling). This is very practical and also reduces the risk of leakage.

Here are the steps to follow to fill the tank of your atomizer:

1. Make a quarter turn on the top cap equipped with an "L-Lock" system to unlock it
2. Pull on the top cap to take the tank off
3. Pour your e-liquid into the large filling hole
4. Put the top cap back and lock it with a quarter turn

Wait for some minutes before vaping.

Filling Early Bird's Emperor RTA atomizer

Box contents

• 1 Early Bird Emperor RTA atomizer
• 1 straight 5ml Pyrex (pre-installed)
• 1 6.5ml bulb Pyrex
• 1 810 drip tip (pre-installed)
• 1 spare 810 drip tip
• 1 spare chamber
• 1 bag of o-rings
• 1 user guide

The Emperor RTA atomizer is made by Early Bird.

Box contents of Early Bird's Emperor RTA atomizer