Vaporesso XROS Pro 2 Podmod

Are you looking for a simple and performing electronic cigarette? The manufacturer Vaporesso presents the XROS Pro 2 podmod, particularly suited to vape beginners, but also experts looking for an intuitive device.

With this kit, you'll be able to vape in MTL or RDL, thanks to its 2,000 mAh built-in battery and 3ml cartridges with XROS sealed coils (0.4 and 0.6ohm) for even simpler use. 

Its thin appearance enables you to easily slide it into your pockets to accompany you all day long.

Vaporesso's XROS Pro 2 podmod

The design of the XROS Pro 2 podmod

With the XROS Pro 2, Vaporesso decided to follow the legacy of the XROS collection by offering a podmod with modern and long finishes, with dimensions of 125.6x25.7x18.4mm for a lightweight of only 65g.

On the main side, you'll discover a TFT screen of 0.96" enabling you to check the following information:

• The level of battery in percentage
• The mode used
• The lock
• The puff counter

The latter is customizable from a Fire button located right above.

The kit is also equipped with an adjustable airflow, located on the back side.

Easily transportable in its pocket or bag, the XROS Pro 2 is easy to handle.

Handling of Vaporesso's XROS 2 Pro podmod

A handy and simple magnetic connection

The podmod is equipped with a 3ml XROS cartridge with a magnetic connection. Very practical, you can connect and remove your tank with a single click, allowing you to easily switch between e-liquid flavors throughout the day.

This connection system provides a secure fit. Equipped with a sealed coil, you simply replace this cartridge with a new one once the coil is worn out.

We also recommend purchasing a set of additional cartridges so you can easily vary the flavors as needed.

The magnetic connection between Vaporesso's cartridge and XROS Pro 2 podmod

A simple-to-use podmod

The XROS Pro 2 podmod is easy to use. To turn it on, simply press the main button five times in succession. You can turn it off using the same method.

Once the podmod is turned on, you can access various settings using the button.

From there, you can:

• 2 presses: change the display theme from among six available options
• 3 presses: adjust the power (NORMAL, ECO, POWER)
• 4 presses: go directly to the main menu

Regarding the power adjustment, if you wish to set it with a 0.6ohm XROS cartridge, you'll have the possibility to choose between 3 pre-defined modes:

• NORMAL mode: to vape with a tight draw in indirect inhaling with 21W
• ECO mode: for an even tighter vape and preserve the battery
• POWER mode: to vape with maximum power

As for the 0.4ohm XROS cartridge, the power adjustment is made manually, once in the settings (3 presses), thanks to the main button.

This menu also gives you access to other customization options:

• Lock or unlock the screen
• Enable or disable visual animations
• Reset the puff counter
• View your puff history using a graph (by day, week, or month)
• Enable or disable the fire button for drawing

In this regard, Vaporesso offers two vaping modes with the XROS Pro 2: the auto-draw system, where you simply inhale through the mouthpiece to vape, or manual activation via the fire button. Choose the mode that best suits your needs.

In addition, the Super Pulse mode, integrated into its chipset, guarantees a stable draw regardless of the remaining battery life.

The screen of Vaporesso's XROS Pro 2 podmod

2,000mAh of rechargeable capacity

The XROS Pro 2 podmod has a built-in battery of 2,000mAh. This capacity offers an autonomy lasting all day.

When the battery level is low, it is time to recharge your podmod. The TFT screen displays the exact percentage of charge left, but also a colored LED located on the main side, displaying this information.

To recharge it, it's very easy: simply connect the USB-C cable (included) to the port, located under the puff, then connect it to a wall socket, a computer, or an external battery.

The USB-C port of Vaporesso's XROS Pro 2 podmod

2 XROS Corex 3.0 cartridges included

The Vaporesso's XROS Pro 2 kit is delivered with two 3ml cartridges with sealed coils included the Corex 3.0 technology.

You'll receive:

• A XROS Corex 3.0 0.4ohm cartridge (pre-installed): to vape in restrictive direct inhaling (RDL), with a power between 20 and 30W
• A XROS Corex 3.0 0.6ohm cartridge: meant for a tighter draw in indirect inhaling (MTL), for a power between 15 and 24W

After two to three weeks of use, the coil is worn out. You only have to change the whole cartridge with a new one, without having to make settings. In the meantime, you can easily refill your e-liquid tank thanks to its top-fill system.

The XROS cartridge of Vaporesso's XROS Pro 2 podmod

The airflow of the XROS Pro 2 podmod

In order to adjust the airflow to the desired vaping style (more or less tight), the XROS Pro 2 pod features an airflow adjustment button located on the opposite side of the power button.

Simply slide it to reveal the air intakes and adjust the airflow to your liking.

The airflow button of Vaporesso's XROS Pro 2 podmod

A 3ml tank rechargeable with e-liquid

The sealed coil cartridge of the XROS Pro 2 podmod can hold up to 3ml of e-liquid.

And to make things even easier, the XROS Pro 2 features a top-fill cartridge. Its beak-shaped drip tip is removable, giving direct access to the filling hole.

There is no need to remove your tank to refill it with e-liquid:

1. Pull on the drip tip to remove it
2. Insert the narrow tip of your bottle into the filling hole; be careful not to spill any liquid into the central chimney
3. Pour in your e-liquid
4. Reattach the drip tip
5. Wait 5 to 10 minutes if you are using a new coil in the cartridge

Filling of Vaporesso's XROS Pro 2 podmod

Box contents

• 1 2,000mAH XROS Pro 2 podmod
• 1 Corex 3.0 0.4ohm sealed coil cartridge
• 1 Corex 3.0 0.6ohm sealed coil cartridge
• 1 USB-C cable
• 1 user guide

The XROS Pro 2 podmod is made by Vaporesso.

Box contents of Vaporesso's XROS Pro 2 podmod