Voopoo Vinci E80 Podmod

The Vinci E80 podmod, made by the brand Voopoo, is meant for all types of vapers thanks to its tight (MTL) or semi-airy (RDL) draw. It has a 3,000 mAh battery capacity, all in a compact format.

Its 80W power combined with Vinci E cartridges and PnP X coils (built-in or removable) allows you to vape with both direct and indirect inhaling.

Its color screen offers three theme options to choose from.

This kit has a magnetic connector between the podmod and its cartridge, which features a top-filling system.

Voopoo's Vinci E80 podmod

The design of the Vinci E80 podmod

Its structure in aluminum alloy and polycarbonate presents reduced dimensions of 115x35x19mm for a weight of only 90g.

This compact design has good ergonomics for the Vinci E80.

Its TFT screen of 1.47" enables checking the vape settings and has three different customizable themes.

The podmod includes:

• A Fire switch
• Two '+' or '-' buttons to set the power in watts
• A button meant for the airflow setting
• A USB-C port
• A sliding locking button

Handling of Voopoo's Vinci E80 podmod

A handy magnetic connection

The system of magnetic connection between the cartridge and the podmod ensures a stable and safe fixation of cartridges while enabling to install or take out the tank.

This mechanism eases the changing between cartridges to pick e-liquids according to your needs.

The magnetic connection of Voopoo's Vinci E80 podmod

An intuitive podmod

To turn the podmod on, push five times on the Fire switch. To turn it off, you only have to repeat the same steps.

The power setting (5 and 80W) is simple: use the '+' and '-' buttons. Are you a beginner? Don't worry. The podmod is made with a Gene AI 2.0 chipset that automatically suggests the power according to the PnP X coil of your cartridge.

If you are carrying the device in your pocket or want to lock your podmod, slide the lock switch. The TFT screen will display a red padlock to confirm that your device is locked.

The 1.47" color TFT screen of Voopoo's Vinci E80 podmod

A 3,000mAh capacity

The Vinci E80 has a built-in battery with a large capacity of 3,000mAh.

Even with continuous use, this battery will last you all day without needing to be charged.

Does the TFT screen show a low battery level?

 The Vinci E80 podmod has a USB Type-C port compatible with 5V/2A fast charging. The Voopo brand includes the charging cable directly in the box. Connect the included USB-C cable to the dedicated port on the device, then connect the other end to a computer USB port or a power adapter (not included) to charge your podmod.

The USB-C port of Voopoo's Vinci E80 podmod

The Vinci E cartridge

The cartridge tank is 5ml with a top filling system.

Two cartridges with sealed coils are included inside the kit:

• A cartridge with 0.3ohm sealed coil for an RDL semi-aerial draw in restrictive direct inhaling
• A cartridge with 0.6ohm sealed coil for an MTL tight draw in indirect inhaling

These cartridges feature Golden Cotton technology, which gives them a long life span and allows them to process up to 100 ml of e-liquid before showing signs of wear. Furthermore, if the built-in coil shows signs of deterioration (decreased flavor, a slight burning taste, etc.), you will need to replace the entire cartridge.

For this, you only have to follow the steps below:

1. Take off the cartridge with the used coil
2. Take a new Vinci E cartridge
3. Fill the tank of the new cartridge
4. Wait for some minutes to let the sealed coil prime in e-liquid

The device is also compatible with the Vinci PnP-X empty cartridges with removable coils.

The Vinci E cartridge of Voopoo's Vinci E80 podmod

Adjustable airflow

Voopoo offers a system of airflow adjustment, with a button on the side of your podmod, enabling you to change the draw according to your preferences.

You'll have the possibility to choose an airier vape by opening or a tighter draw by closing the button.

The airflow button of Voopoo's Vinci E80 podmod

The tank filling

The e-liquid refilling is simple and quick. It is made at the top of the cartridge.

To fill the Vinci E cartridge, no need to take it out of the magnetic base.

Here are the steps:

1. Look for the silicone strip of your cartridge
2. Close the strip
3. Insert the e-liquid bottle tip into the hole
4. Press the bottle to fill
5. Close the silicone strip

Is this the first time you have filled the cartridge tank? Wait 10 to 15 minutes to allow the new coil to soak up the e-liquid.

The filling of the Vinci E cartridge on Voopoo's Vinci E80 podmod

Box contents

• 1 3,000mAh Vinci E80 podmod
• 1 Vinci E cartridge in 0.3ohm
• 1 Vinci E cartridge in 0.6ohm
• 1 USB-C cable
• 1 user guide

The Vinci E80 podmod is made by Voopoo.

Box contents of Voopoo's Vinci E80 podmod