Dotmod DotPod Plus Podmod

The DotPod Plus: simplicity and elegance that will suit all vapers.

The DotMod manufacturer presents its DotPod Plus podmod, an e-cigarette both modern thanks to its finishes, and high-performance with a maximum power of 35W.

With a built-in battery, your equipment has an efficient capacity of 1,500mAh.

DotMod makes its podmod compatible with the 3ml DotPod Plus cartridge with sealed coil, available at different values.

With its intuitive operation and variety of coils, your DotPod Plus is accessible to all types of vapers.

Dotmod's DotPod Plus podmod

A studied design for clever equipment

Recognizable by the premium quality of its creations, the manufacturer DotMod designs your podmod in the same spirit.

Made from a zinc/IML alloy, its dimensions of 121.4 x 27.8 x 15.8mm and weight of 90g ensure good handling.

To complete the device, DotMod has included a 0.96” color screen with a haptic feedback system for when you are using it.

Handling of Dotmod's DotPod Plus podmod

The magnetic base

Do you need to alternate flavors in your tank? Easily change your cartridges thanks to a magnetic connection system.

Thanks to its haptic feedback, your equipment makes two vibrations if the cartridge is taken out.

The magnetic connection of Dotmod's DotPod Plus podmod

An intuitive and accessible equipment

The DotPod Plus podmod by DotMod presents a functioning system as easy as it is complete, making its use accessible for experts as well as beginners.

Equipped with a maximum power of 35W, your equipment presents different use modes from the color screen:

• Start/Desactivation: Push 5 times
• Lock/Unlock: Push 4 times
• Customized adjustment of the power: Push 3 times
• Main menu: Push 6 times

The access of the latter allows to choose the theme, the puff counter, and the brightness of your screen.

Please note that your podmod also features an overheating detection function for safe use.

The built-in battery of the DotPod Plus podmod

The DotMod brand has equipped its e-cig with a built-in battery with a total capacity of 1,500mAh.

To charge your podmod, use the USB-C cable included in your box and connect it to the dedicated port located on the side.

The USB-C port of Dotmod's DotPod Plus podmod

The DotPod Plus cartridge

With the creation of the DotPod Plus, the manufacturer DotMod has made the DotPod Plus cartridge compatible.

In addition to a fixed coil, your tank can hold up to 3ml of e-liquid.

The 5 leakproof layers prevent any e-liquid from leaking.

Dotmod's DotPod Plus cartridge

A sealed coil

Particularly meant for vape beginners, DotMod has equipped its DotPod Plus with a non-removable coil cartridge.

Also designed for different types of vapers, the DotPod Plus cartridge is available in several versions with different coil values to suit your draw.

To this end, DotMod includes the following cartridges in the box:

• 1 DotPod Plus cartridge with 0.6ohm sealed coil (pre-installed): designed for a tighter draw (MTL), to be used between 22W and 24W
• 1 DotPod Plus cartridge with 0.4ohm sealed coil (included): for a slightly airier vape (RDL), to be used between 28W and 35W

Please note that the cartridge is also available in other coil values (not included).

Once worn out, dispose of the tank in an appropriate container before changing it for a new one.

An adjustable airflow

DotMod adds an airflow setting button to your equipment so you can customize your vape experience.

To do this, slide the airflow to allow more or less air to pass through: the more you open it, the cloudier the draw; the more you close it, the more restrictive the draw.

The airflow button of Dotmod's DotPod Plus podmod

The cartridge filling of the DotPod Plus podmod

Respect the advice below to fill the tank of your DotPod Plus podmod:

1. Open the silicon strip
2. Insert the tip of your bottle into the hole
3. Fill the DotPod Plus cartridge
4. Close the strip

Wait for some minutes before using your DotPod Plus podmod, so the coil is correctly primed, as it is a new cartridge.

The filling of Dotmod's DotPod Plus podmod

Box contents

• 1 DotPod Plus podmod
• 1 3ml DotPod Plus cartridge with 0.6ohm sealed coil (pre-installed)
• 1 3ml DotPod Plus cartridge with 0.4ohm sealed coil
• 1 USB-C cable

The DotPod Plus podmod is made by DotMod.

Box contents of Dotmod's DotPod Plus podmod