OXVA XLIM Pro 2 Podmod

The XLIM Pro podmod comes back with 1,300mAh and a leather-effect look! A second version to discover in this video!

The brand OXVA presents the second version of its XLIM Pro podmod, an intuitive electronic cigarette particularly suited for vape beginners.

The difference between these two podmods is in the design, with a leather-effect look for this second version.

The XLIM Pro 2 also offers a slightly higher capacity, being 1,300mAh.

You'll also find a TFT screen (HD color), compatibility with the 2ml cartridges with XLIM Top Fill and XLIM V2 sealed coils of the manufacturer, and its power setting up to 30W.

OXVA's XLIM Pro 2 podmod

The design of XLIM Pro 2

With a slightly longer look compared to the predecessor, the XLIM Pro 2 presents dimensions of 114.5 x 25 x 15mm for a weight of only 66g.

You'll find it in its structure covered of faux leather:

• 1 0.56" HD color screen
• 1 Fire button
• 1 airflow button
• 1 USB-C port

Once it's in your hand, you'll trigger it by simply inhaling from the mouthpiece.

Handling of OXVA's XLIM Pro 2 podmod

How does the XLIM Pro 2 work?

Particularly simple to use, the XLIM Pro 2 lets you the choice between an automatic or manual activation to vape.

For the rest, you'll use its Fire button to proceed to the power setting:

• 1 click: Ignition of the screen
• 2 clicks: change of the display
• 3 clicks: power setting up to 30W
• 5 clicks: turn on and off the podmod
• 7 clicks: reset the puff counter
• Long push: user guide

OXVA slides it in the box of your XLIM Pro 2, a lanyard allows you to always have your electronic cigarette at hand.

The HD color screen of OXVA XLIM Pro 2 podmod

OXVA also keeps its handy magnetic connection system between the podmod and the cartridge, allowing you to easily alternate the flavors during the day!

The magnetic connection of OXVA's XLIM Pro 2 podmod

A 1,300mAh capacity

The XLIM Pro 2 has a 1,300mAh built-in battery offering a use capacity going up to 4 days without being recharged.

Find on the HD color screen, the percentage of battery charge, and the cable included in the box to fill it with energy.

This cable has to be connected to the USB-C port of the podmod located below your e-cigarette.

The USB-C port of OXVA's XLIM Pro 2 podmod

The XLIM Top Fill cartridge

Compatible with the XLIM Top Fill and XLIM V2 cartridges, your podmod is delivered with two XLIM Top Fill. These disposable cartridges have a sealed coil so you don't have to worry about handling your coils.

According to the type of vape wished, you'll select the coil value that suits you among the two included in the box:

• XLIM Top Fill Cartridge with a 0.8ohm sealed coil: to use between 12 and 16W for a tight draw in indirect inhaling (MTL)
• XLIM Top Fill Cartridge with a 0.6ohm sealed coil (pre-installed): to use between 20 and 25W for a slightly less tight vape in restrictive direct inhaling (RDL)

After two to three weeks of use, the built-in coil will show some signs of wear like a loss of flavors or a light burnt taste. It will be time to replace the whole cartridge with a new one.

The XLIM Top Fill cartridge of OXVA's XLIM Pro 2 podmod

Adjustable air intakes

OXVA lets you choose the draw sensations by giving the XLIM Pro 2 an airflow button.

Make the latter slide to free more or less the air intake holes; you'll alternate between a tight in slightly more airy draw!

Find the airflow button on the opposite side of the Fire button.

The airflow button of OXVA's XLIM Pro 2 podmod

How to fill the XLIM Pro 2 podmod?

One of the advantages of the XLIM Pro 2: no need to take the Top Fill cartridge to proceed to the e-liquid recharge!

To fill the 2ml of the tank, follow the steps below:

1. Spot the silicon strip on the side of the cartridge and lift it
2. Insert the thin tip of your bottom into the hole
3. Pour your e-liquid
4. Carefully close the strip

Wait for some minutes before vaping it if you use a new cartridge so the coil is correctly primed with e-liquid.

The filling of OXVA's XLIM Pro 2 podmod

Box contents

• 1 XLIM Pro 2 podmod
• 1 XLIM Top Fill cartridge with a 0.6ohm sealed coil (pre-installed)
• 1 XLIM Top Fill cartridge with a 0.8ohm sealed coil
• 1 USB-C cable
• 1 lanyard
• 1 user guide

The XLIM Pro 2 podmod is made by OXVA.

Box contents of OXVA's XLIM Pro 2 podmod