Aspire Huracan Clearomizer

The Huracan clearomizer by Aspire is clearly made for vapers looking for an airy vape in direct inhaling (DL).

With an 810 drip-tip, two Pyrex tanks of 4 or 6ml, and air intakes in top-airflow, without talking of this BP Coil in Mesh coils, it enables an airy vape.

Easy to use and maintain, this clearomizer is also compatible with all electronic mods of 26mm minimum diameter.

The Huracan clearomizer with Rhea X mod by Aspire

A vapor-focused clearomizer

At first glance, you'll notice its 810 drip tip, air intakes, and round tank... Everything tells you what it's all about: an airy vape!

Quite imposing with its 52 mm height and 26 mm diameter, the Huracan clearomizer remains humble. Its look is sleek, made entirely of high-quality stainless steel.

The Huracan clearomizer by Aspire

BP Coils: a DL vape with clouds

As a clearomizer, the Huracan will work with pre-made coils: the BP Coil by Aspire. In Mesh and sub-ohm type, the coils are made to give each flavor exactly, but also to produce a nice vapor dose, for a direct inhalation vape (DL).

You'll find two, delivered in your Huracan clearomizer :

• A BP Coil Mesh 0.15Ω. Pre-installed in the clearomizer. Use from 60 to 80 watts.
• A BP Coil Mesh 0.3Ω. Included in the box. Use from 30 to 40 watts.

On one side, you'll enjoy a vape full of vapor, typically DL. On the other side, you'll have sensations slightly less powerful, in restrictive direct inhalation (RDL).

In both cases, it is recommended to use e-liquids with a strong VG rate (+ of 50% of vegetable glycerin).

How to change the Huracan coil?

Every two to three weeks (depending on the e-liquid used), you need to change your coil. You also have to do it when you go from one e-liquid to another (especially from a fruity to a sweet one), or once you feel a disagreeable burnt taste.

To change your BP Coil :

1. Unscrew the low part of your Huracan clearomizer (with 510 connection)
2. Pull the used coil to take it out of its place. Throw it out.
3. Insert the new coil in the same place: don't forget to prime by pouring some drops of e-liquid on your cotton
4. Proceed to the filling if needed. Wait for ten minutes for a perfect prime.

The top airflow of Huracan

Even though most of the clearomizers have airflow on their low part, the Huracan clearomizer decided to put it on the high part. It's called: "top-airflow".

Why such a system? To ease the adjustment, but to avoid the leaks of e-liquid.

With two airflow windows, you'll enjoy an airflow dial that is precisely adjusted. You need to turn from left to right till you find the ideal combination!

The top airflow of the Huracan clearomizer by Aspire

How to fill the Huracan?

The Huracan clearomizer comes with two tanks: one of 6ml, with Bulb format, already installed; another of 4ml, with a straight format, included in your box.

Both are made of Pyrex, a resistant material that keeps the aromatic result of your e-liquids and that is really easy to maintain.

The Huracan clearomizer by Aspire, with a second straight Pyrex of 4ml

The filling of the Huracan clearomizer is made by the top.

According to the Pyrex tank installed, you'll fill it up to 4ml to 6ml of e-liquid. To do that :

1. Unscrew the high part of the clearomizer ("top cap" piece with the 810 drip-tip)
2. Insert the cap of your bottle in one of the nice visible splits
3. Fill
4. Screw the top of the clearomizer

Some measures: before each filling, it is better to close the airflows to avoid any leak; don't ever put e-liquid in the middle hole; wait for ten minutes after the recharging of e-liquid, to be certain that the coil is correctly primed.

The filling of the Huracan clearomizer by Aspire

Contents of the box

• A Huracan clearomizer
• A BP Coil Mesh 0.15Ω (pre-installed)
• A BP Coil Mesh 0.3Ω
• A second Pyrex, tube format, 4ml capacity
• A set of spare pieces
• A user manual

The Huracan clearomizer is made by Aspire.

The contents of the box of the Huracan clearomizer by Aspire